Quickgarage.com

High quality portable buildings. Read more about canopies, steel carports, and portable garages here.


Leave a comment

Round 12′ Wide x 24’ Long x 8′ High

MDM Products, LLC provides the best in instant and portable protection for any purpose.

Typical uses include:

  • Vehicle protection and storage
  • Equipment / material storage
  • Workshop areas.

The house style provides extra space along the sides of the enclosure, with maximum height near the center ridge. The pre-drilled frame is easily assembled with minimal handtools. All frame components are made from heavy duty galvanized steel. Main cover and doors are made from long life UV Resistant, Fire Retardant Polyethylene with woven backing.

All fabric components feature heat-welded seam construction. Unit features double zipper door on BOTH ENDS to allow drive-through capability, and good ventilation. Each door contains a pocket for a rigid pole at the base. The long lasting cover is designed with full flap provides for run-off of rain or melting snow and diverts water from entering through the perimeter of the cover. Each unit comes completely equipped with a set of earth anchors with 36″ stainless steel tethers and a 36” drive rod to secure the unit at each corner and each frame arch.

Exclusive Extended Storage Features

  • Heavy Duty Galvanized Finish on All Steel Frame
    Components for Maximum Strength & Long Life
  • Easy Bolt Together Design – all Pre-drilled & Cut
  • Wind Brace Support on Both Sides
  • Two(2) Double Zipper Doors with Bottom Pockets
  • Protective Plastic Tube End Caps – All Open Ends
  • Standard Thread Plated Hardware Kit with Retaining
    Nuts & Protective SS Washers
  • Quick Assembly Wrench included
  • Heavy Duty Poly Rope for Main Cover Tie Down
  • Heavy Duty Grommets on Cover & Doors
  • Assembles in 2 hrs.
  • Two Box Shipment – easily unloaded and transported (shown right)

 

Standard Specifications

Nominal Size 12′ Wide x 24’ Long x 8′ High
Arches Seven (7) on 48″ spacing
1-5/8″ diameter frame members
Standard End Door Size Manway Door: 6’W x 8’H
Double Zipper Back Panel: 10’ W x 6’H
Available Colors Translucent
Shipping Weight 344 Lbs. in Two (2) boxes shipped via motor freight
Box Dimensions House Style
Box 1: 63.5″ Long x 17.5″ Wide x 8″ High
Box 2: 67″ Long x 21.5″ Wide x 8.5″ HighRound Style
Box 1: 57.5″ Long x 15.37″ Wide x 7.5″ High
Box 2: 73.62″ Long x 21.5″ Wide x 9″ High
Main Cover UV protected 24 mil, fabric backed poly. 10oz. weight
Fire Retardant Standard Main Cover & Doors meet CPAI -84 Section 5
Anchors Six ( 6 ) 36″ Anchors with U-Bolts & 36″Drive Rod Std.
Stock Number 12x24x8(*)HSK
* – Color Prefix: Green, Grey etc.

roundgreenhouse round-greenhouse-building round-style-greenhouse


Leave a comment

House 12′ Wide x 24’ Long x 8′ High

MDM Products, LLC provides the best in instant and portable protection for any purpose.

Typical uses include:

  • Vehicle protection and storage
  • Equipment / material storage
  • Workshop areas.

The house style provides extra space along the sides of the enclosure, with maximum height near the center ridge. The pre-drilled frame is easily assembled with minimal handtools. All frame components are made from heavy duty galvanized steel. Main cover and doors are made from long life UV Resistant, Fire Retardant Polyethylene with woven backing.

All fabric components feature heat-welded seam construction. Unit features double zipper door on BOTH ENDS to allow drive-through capability, and good ventilation. Each door contains a pocket for a rigid pole at the base. The long lasting cover is designed with full flap provides for run-off of rain or melting snow and diverts water from entering through the perimeter of the cover. Each unit comes completely equipped with a set of earth anchors with 36″ stainless steel tethers and a 36” drive rod to secure the unit at each corner and each frame arch.

Exclusive Extended Storage Features

  • Heavy Duty Galvanized Finish on All Steel Frame
    Components for Maximum Strength & Long Life
  • Easy Bolt Together Design – all Pre-drilled & Cut
  • Wind Brace Support on Both Sides
  • Two(2) Double Zipper Doors with Bottom Pockets
  • Protective Plastic Tube End Caps – All Open Ends
  • Standard Thread Plated Hardware Kit with Retaining
    Nuts & Protective SS Washers
  • Quick Assembly Wrench included
  • Heavy Duty Poly Rope for Main Cover Tie Down
  • Heavy Duty Grommets on Cover & Doors
  • Assembles in 2 hrs.
  • Two Box Shipment – easily unloaded and transported (shown right)

Standard Specifications

Nominal Size 12′ Wide x 24’ Long x 8′ High
Arches Seven (7) on 48″ spacing
1-5/8″ diameter frame members
Standard End Door Size Manway Door: 6’W x 8’H
Double Zipper Back Panel: 10’ W x 6’H
Available Colors Translucent
Shipping Weight 344 Lbs. in Two (2) boxes shipped via motor freight
Box Dimensions House Style
Box 1: 63.5″ Long x 17.5″ Wide x 8″ High
Box 2: 67″ Long x 21.5″ Wide x 8.5″ HighRound Style
Box 1: 57.5″ Long x 15.37″ Wide x 7.5″ High
Box 2: 73.62″ Long x 21.5″ Wide x 9″ High
Main Cover UV protected 24 mil, fabric backed poly. 10oz. weight
Fire Retardant Standard Main Cover & Doors meet CPAI -84 Section 5
Anchors Six ( 6 ) 36″ Anchors with U-Bolts & 36″Drive Rod Std.
Stock Number 12x24x8(*)HSK
* – Color Prefix: Green, Grey etc.

greenhouse-house-building housestyle-greenhouse house-style-greenhouse

 


Leave a comment

Round 12’ Wide x 20’ Long x 8’ High

BE READY FOR EARLY SPRING GARDENING with our instant backyard greenhouses!

These roomy, greenhouses go up easily, and will have you ready for plants in a couple hours. Both come complete with anchors, double zipper back panel, and front panel manway door.

Exclusive Greenhouse Features

  • Heavy Duty Galvanized Finish on All Steel Frame
    Components for Maximum Strength & Long Life
  • Easy Bolt Together Design – all Pre-drilled & Cut
  • Wind Brace Support on Both Sides
  • Double Zipper Door with Bottom Pocket
  • Four(4) Bungee Cord Tie Backs for Doors
  • Protective Plastic Tube End Caps – All Open Ends
  • Standard Thread Plated Hardware Kit with Retaining
    Nuts & Protective SS Washers
  • Quick Assembly Wrench included
  • Heavy Duty Poly Rope for Main Cover Tie Down
  • Heavy Duty Grommets on Cover & Doors
  • Two Box Shipment – easily unloaded and transported
  • Average Install time – 2 hours

Standard Specifications

Nominal Size 12’ Wide x 20’ Long x 8’ High
Arches 6 on 48″ spacing 1-5/8” Dia. Pipe
Standard End Door Size Manway Door: 6’W x 8’H
Double Zipper Back Panel: 10’ W x 6’H
Available Colors Translucent
Shipping Weight Shipped in 2 boxes 295 lbs
Box Dimensions Box 1: 63.5″ Long x 17.5″ Wide x 7.5″ High
Box 2: 66.5″ Long x 20.5″ Wide x 8.75″ High
Main Cover UV Protected Fabric 20 mil Backed Poly Material 8 0z. Weight
Fire Retardant Standard Main Cover & Doors meet CPAI -84 Section 5
Anchors Six(6) 36” Anchor with U-Bolts & Drive Rod
Stock Numbers 12’x20’x8′ Greenhouse: #82004

 


Leave a comment

Peaked Style 65’ Wide x 49’ Long x 26’ High

MDM Products, LLC provides the best in instant and portable protection for any purpose.

Typical uses include:

  • Salt and Sand Storage
  • Air Planes
  • Swimming Pools
  • Riding Arena
  • Construction Sites

MDM Products 65×49 Peaked Truss Buildings are designed for heavy commercial, agricultural and industrial use. From the heavy steel galvanized frame to unique dual cover tensioning system, the building is heavy duty from front to back. Typical uses include large workshop areas, animal protection, long term jobsite storage, and multiple truck or car storage. Completely packaged and ready for quick assembly, the frame is the heaviest available in single tube construction. All frame components are made from heavy galvanized materials. Main Cover, Door, and All Fabrics are made from Long-Life UV Resistant, Fire Retardant PVC with woven backing.

All fabric components feature heat-welded seam construction. Unit features a unique dual cover tensioning system that allows quick adjustment both front-to-back and side-to-side. The easy-up Door can be winched up from outside the building with little to no effort. Wind release flaps on both sides allow for wind absorption. Long lasting cover design provides for run-off of rain, or melting snow, to avoid water getting in through the perimeter of the cover. Each unit comes equipped with both a set of 14 earth anchors and a set of Auger style anchors to secure the unit at all strategic points.

Exclusive Domed Truss Features

  • Sliding fabric door with 39′ Width x 13′ Height.
  • 13′ side wall clearance so you can store equiptment at the edges of your shelter.
  • Ratchet down cover for a drum tight fit.
  • 2′ Truss for extra strength.
  • Heavy duty 3 ” Dia. structural steel frame.

Standard Specifications

Nominal Size 65’ Wide x 49’ Long x 26’ High
Arches Nine (9) on 73” Spacing 3” Frame Members
Standard End Door Size 39’ Width x 13′ Height
Available Colors Outer Colors: White
All Interiors: White Only
Shipping Weight 16255 lbs shipped in 2 Crates* Shipped via Motor Freight
Box Dimensions Box 1: 14.2′ Long x 2.4′ Wide x 2.3′ High
Box 2: 13.6′ Long x 2.4′ Wide x 3.6′ High
*Please note: there are parts that are too large to be packed that weigh a total of 9639 lbs.
Main Cover UV Protected PVC Material 18.1 0z. Weight
Fire Retardant Standard Main Cover & Doors meet CPAI -84 Section 5
Anchors Eighty-Eight (88) Steel Pegs & Twenty-Nine (29) 36” Anchors with U-Bolts & Drive Rod Std.
Stock Number 65x49x26(*)HSK
* – Color Prefix: White

65 x 49 x 26 portable building Industrial Shelter Peaked Truss Building vehicle-protection-building

 


Leave a comment

Round 30’ Wide x 65’ Long x 15’ High

MDM Products, LLC provides the best in instant and portable protection for any purpose.

Typical uses include:

  • Vehicle protection and storage
  • Equipment / material storage
  • Workshop areas.

MDM Products 30×65 Buildings are designed for heavy commercial, agricultural and industrial use. From the heavy steel galvanized frame to unique dual cover tensioning system, the building is heavy duty from front to back. Typical uses include large workshop areas, animal protection, long term jobsite storage, and multiple truck or car storage. Completely packaged and ready for quick assembly, the frame is the heaviest available in single tube construction. All frame components are made from heavy galvanized materials. Main Cover, Door, and All Fabrics are made from Long-Life UV Resistant, Fire Retardant Polyethylene with woven backing.

All fabric components feature heat-welded seam construction. Unit features a unique dual cover tensioning system that allows quick adjustment both front-to-back and side-to-side. The easy-up Door can be winched up from outside the building with little to no effort. Wind release flaps on both sides allow for wind absorption. Long lasting cover design provides for run-off of rain, or melting snow, to avoid water getting in through the perimeter of the cover. Each unit comes equipped with both a set of 14 earth anchors and a set of Auger style anchors to secure the unit at all strategic points.

Exclusive Heavy Commercial Round Features

  • Heavy-Duty Galvanized Finish – All Steel Frame
  • Roll Up Mechanical Door
  • Wind Brace Support on Each Corner
  • Double Cover Tensioning System
  • Complete Anchoring System Included
  • 10oz., CPAI-84 Fabric Cover and Doors
  • Assembles in 8 Hrs

Standard Specifications

Nominal Size 30’ Wide x 65’ Long x 15’ High
Arches Eleven (11) on 79″ spacing 2 3/8″ Diameter Frame members
Standard End Door Size 11′ Width x 12’6″ Height
Mechanical Roll Up Design
Available Colors Outer Colors: White
All Interiors: White Only
Shipping Weight 3172 Lbs. in Two (2) Crates
Weight Shipped via motor freight
Box Dimensions Box 1: 9.6′ Long x 2.4′ Wide x 2.3′ High
Box 2: 8.9′ Long x 2.4′ Wide x 2.3′ High
Main Cover UV protected 22 mil, fabric
backed poly. 10oz. weight
Fire Retardant Standard Main Cover & Doors meet CPAI -84 Section 5
Anchors Eighteen (18) 36″ Anchors &
Eighteen (18) Augers Included
Stock Number 30x65x15(*)HSK
* – Color Prefix: White

30x65x15-portable-building 30x65x15-portable-shed-building large-size-portable-building portable-building-garage

 


Leave a comment

Round 30’ Wide x 40’ Long x 15’ High

MDM Products, LLC provides the best in instant and portable protection for any purpose.

Typical uses include:

  • Vehicle protection and storage
  • Equipment / material storage
  • Workshop areas.

MDM Products 30×40 Buildings are designed for heavy commercial, agricultural and industrial use. From the heavy steel galvanized frame to unique dual cover tensioning system, the building is heavy duty from front to back. Typical uses include large workshop areas, animal protection, long term jobsite storage, and multiple truck or car storage. Completely packaged and ready for quick assembly, the frame is the heaviest available in single tube construction. All frame components are made from heavy galvanized materials. Main Cover, Door, and All Fabrics are made from Long-Life UV Resistant, Fire Retardant Polyethylene with woven backing.

All fabric components feature heat-welded seam construction. Unit features a unique dual cover tensioning system that allows quick adjustment both front-to-back and side-to-side. The easy-up Door can be winched up from outside the building with little to no effort. Wind release flaps on both sides allow for wind absorption. Long lasting cover design provides for run-off of rain, or melting snow, to avoid water getting in through the perimeter of the cover. Each unit comes equipped with both a set of 14 earth anchors and a set of Auger style anchors to secure the unit at all strategic points.

Exclusive Heavy Commercial Round Features

  • Heavy-Duty Galvanized Finish – All Steel Frame
  • Roll Up Mechanical Door
  • Wind Brace Support on Each Corner
  • Double Cover Tensioning System
  • Complete Anchoring System Included
  • 10oz., CPAI-84 Fabric Cover and Doors
  • Assembles in 8 Hrs

Standard Specifications

Nominal Size 30’ Wide x 40’ Long x 15’ High
Arches Seven (7) on 68″ spacing 2 3/8″ Diameter Frame members
Standard End Door Size 11′ Width x 12’6″ Height
Mechanical Roll Up Design
Available Colors Outer Colors: White
All Interiors: White Only
Shipping Weight 2200 Lbs. in Two (2) Crates
Weight Shipped via motor freight
Box Dimensions Box 1: 116″ Long x 29″ Wide x 24″ High
Box 2: 107″ Long x 29″ Wide x 21″ High
Main Cover UV protected 24 mil, fabric
backed poly. 10oz. weight
Fire Retardant Standard Main Cover & Doors meet CPAI -84 Section 5
Anchors Fourteen (14) 36″ Anchors &
Fourteen (14) Augers Included
Stock Number 30x40x15(*)HSK
* – Color Prefix: White

30 x 40 x 15 portable building 30 x 40 x 15-portablebuilding 30 x 40 x 15-portable-buildings portable-garage-kit


Leave a comment

Relief Tent 18’ Wide x 32’ Long x 15’ High

MDM Products, LLC provides the best in instant and portable protection for any purpose.

Typical uses include:

Rhino Shelter Disaster Relief Tents provide the best in instant, portable protection for any environment. The Disaster Relief Tent can accommodate up to 40 people comfortably in hot or cold climate. The double fly cover helps reduce heat gain inside the main tent and also provides water run off so that the roof windows can stay open at all times for maximum ventilation. This model has been a popular choice among relief agencies, specifically the U.N. The frame members slide into each other so there is no need for hand tools. Unlike other products, no drilling or field cutting is required. All frame components are made from heavy duty Structural steel. Main cover and doors are made from long life UV Resistant, Fire Retardant PVC Vinyl Fabric that is CPAI-84 rated. All fabric components feature heat-welded seam construction. Unit features PVC door flaps with mosquito screen. Each door has Velcro hold-ups for securing them up during use. The tent also includes a fabric floor kit with a rubber bottom that is both heavy duty and comfortable to sit on. Each unit comes with an anchor system complete with stakes for keeping the outside fly from touching the inner shelter.

Exclusive Disaster Relief Tent Features

  • Two (2) PVC Fabric Doors With Screen
  • Heavy duty 1 5/8″ Dia. Structural Steel Frame
  • Doublefly Cover Design
  • Velcro Windows With Mosquito Screen
  • Roof Truss and Removable Center Supports
  • Fabric Floor Kit Included
  • Complete Anchoring System Included
  • 18 oz. CPAI-84 PVC Vinyl Cover and Doors

Standard Specifications

Nominal Size 18’ Wide x 32’ Long x 15’ High
Arches Five (5) on 48” Spacing 1 5/8” Frame Members
Standard End Door Size Two (2) 16’ Wide x 13′ High
Available Colors Outer Colors: White
All Interiors: White Only
Shipping Weight 1,090 lbs shipped in 2 Boxes and 7 Bags* Shipped via Motor Freight
Main Cover UV Protected PVC Material 18.1 0z. Weight
Fire Retardant Standard Main Cover & Doors meet CPAI -84 Section 5
Anchors Eight(8) Stake in Anchors
Stock Number 18x32x15(*)DRT
* – Color Prefix: White
Windows Eight (8) 3′ High x 4′ Long Side Windows
Eight (8) 3′ High x 2′ Long Roof Windows
With Velcro Hold Ups and Mosquito Net Screening

 

relief shelter relief tent relief-building-portablerelief-shed

Follow

Get every new post delivered to your Inbox.